3 way mixing control valve Features & Specifications

Size:DN20~DN600 1/2”-24”

Pressure:PN1.6MPa~ PN42 MPa 150LB-2500LB JIS 10K ~JIS 40K

End connection:RF RJ ,BW

Material:WCB，WC6，LCB,CF8，CF8M，CF3M,904L, 316Ti ,A105 ,F304,F316, Duplex stainless steel, Monel, Hastelloy, (Special Materials on Request)

Bonnet type: Normal type（P）：－45～＋250℃

Extend type with I type-High temperature type（EI）：＋250～＋566℃

Extend type with EII type--cryogenic type（EII）：－45～－196℃

3 way mixing control valve Trim type:

Pressure-balanced spool

Flow characteristics: Equal Percentage ,Linear type

Leakage class:class IV(stand type ) class V, class VI

Adjustable ratio:50:1

Actuator type :

Pneumatic actuator:Pneumatic diaphragm actuator or pneumatic piston actuator

Air supply: 3-7bar

Failure position :Normally closed ,Normally open

Pneumatic three-way regulating valve is mainly composed of  body, spool,seat, stem, piston pneumatic actuator, etc. The working principle of the pneumatic three-way control valve is mainly to adjust the fluid parameters in the pipeline by controlling the pressure and flow of gas. Specifically, when the pressure or flow in the pipeline changes, the sensor converts these signals into electrical signals and transmits them to the control instrument. The control instrument controls the action of the actuator based on the deviation between the set value and the actual value, thereby changing the opening of the valve port to adjust parameters such as medium flow and pressure.