Pneumatic Flow Control Valve Features:

Size: DN20~DN600 1/2“-24"

Pressure: PN1.6MPa~ PN11.0 MPa 150LB-600LB JIS 10K~JIS 40K

End connection: RF RJ BW

Material: WCB, WC6, LCB CF8, CF8M, CF3M, 904L, 316Ti, A105 , F304, F316, Duplex stainless steel, Monel,  Hastellov, (Special Materials on Request)

Bonnet type: Bellow seal tpe, -196-+350℃

Pneumatic Flow Control Valve Trm type:

Pressure-balanced spool

Flow characteristics: Equal Percentage, Linear type

Leakage class: class lV(stand type ) class V,  class VI

Adjustable ratio: 50:1

Actuator type:

Pneumatic actuator: Pneumatic diaphragm actuator or pneumatic piston actuator

Air supply: 3-7bar

Failure position: Normally closed (NC), Normally open(NO)

The main components of the pneumatic flow control valve include the pneumatic
actuator and valve body. When the air source signal acts on the pneumatic diaphragm, a
displacementwill be generated. This displacement is transmitted to the actuator, pushing
the valve spool to move, thereby changing the flow cross-sectional area of the regulating
valve and achieving flow regulation.