Cage guide Control Valve Features & Specifications

Size:DN20~DN600 1/2”-24”

Pressure:PN1.6MPa~ PN42.0 MPa 150LB-2500LB JIS 10K ~JIS 40K

End connection:RF RJ ,BW

Material:WCB，WC6，LCB ,CF8，CF8M，CF3M, LCB,904L, 316Ti , A105 ,F304,F316, Duplex stainless steel, Monel, Hastelloy, (Special Materials on Request)

Bonnet type: Normal type（P）：－45～＋250℃

Extend type with I type-High temperature type（EI）：＋250～＋566℃

Extend type with EII type--cryogenic type（EII）：－45～－196℃

Cage guide Control Valve Trim type:

Cage guided and Pressure-balanced spool

Flow characteristics: Equal Percentage ,Linear type

Leakage class:class IV(stand type ) class V, class VI

Adjustable ratio:50:1

Actuator type :

Electric actuator:Electric actuator:381L electric actuator,PSL electric actuator, Intelligent electric actuator or other specified actuator

Function:cut-off type , regulating type,explosion proof and so on

Control signal:4-20mA,1~5V DC  

Power DC 24V;AC-24V,110V,220V,380V

ZDLM electric cage control valve adopts cage guide, pressure balance type double sealing surface and single sealing surface structure, it is a balance type control valve.  It has a compact structure,  fluid passage is S-streamline. The advantages are small pressure drop  loss, large fluid volume, wide adjustable range and high flow characteristic accuracy. Control valve is equipped with a small, sturdy and high-precision actuator that receives ON-OFF or 4-20mA DC or 1~5V DC signal for proportional action. It is more suitable for the requirements of good dynamic stability, low noise, cavitation/flash evaporation etc., It used under high and low temperature, high pressure differential fluid control conditions.