Cage guide Control Valve Features & Specifications

Size: DN20~DN5600 1/2”-24”

Pressure: PN1.6MPa~ PN42.0 MPa 150LB-2500LB JIS 10K ~JIS 40K

End connection: RF RJ ,BW

Material: WCB，WC6，LCB ,CF8，CF8M，CF3M, LCB,904L, 316Ti , A105 ,F304,F316, Duplex stainless steel, Monel, Hastelloy, (Special Materials on Request)

Bonnet type: Normal type(P)：－45～＋250℃

Extend type with I type-High temperature type(EI)：＋250～＋566℃

Extend type with EII type--cryogenic type(EII)：－45～－196℃

Cage guide control valve Trim type:

Cage guide and Pressure-balanced spool

Flow characteristics: Equal Percentage, Linear type

Leakage class: class IV(stand type ) class V, class VI

Adjustable ratio: 50:1

Actuator type:

Electric actuator: 381L electric actuator, PSL electric actuator, Intelligent electric actuator or other specified actuator

Function: cut-off type, regulating type, explosion proof and so on

Control signal: 4-20mA, 1~5V DC

Power DC 24V;AC-24V, 110V, 220V, 380V

ZDLM electric control valve adopts cage guide, pressure balance type double sealing surface and single sealing surface structure, it is a balance type control valve. valve body has a compact structure, fluid passage is S-streamline. The advantages are small pressure drop  loss, large fluid volume, wide adjustable range and high flow characteristic accuracy. Control valve is equipped with a small, sturdy and high-precision actuator that receives ON-OFF or 4-20mA DC or 1~5V DC signal for proportional action. It is more suitable for the requirements of good dynamic stability, low noise, cavitation/flash evaporation etc., It used under high and low temperature, high pressure differential fluid control conditions.