Angle Type Control Valve Features & Specifications

Size:DN20~DN500 1/2”-20”

Pressure:PN1.6MPa~ PN42 MPa 150LB-2500LB JIS 10K ~JIS 40K

End connection:RF RJ ,BW

Material:WCB，WC6，CF8，CF8M，CF3M, LCB,904L, 316Ti A105 ,F304,F316, Duplex stainless steel, Monel, Hastelloy, (Special Materials on Request)

Bonnet type: Normal type（P）：－45～＋250℃

Extend type with I type-High temperature type（EI）：＋250～＋566℃

Extend type with EII type--cryogenic type（EII）：－45～－196℃

Angle Type Control Valve Trim type:

Pressure-balanced spool with balance seal ring

Flow characteristics: Equal Percentage ,Linear type

Leakage class:class IV(stand type ) class V, class VI

Adjustable ratio:50:1

Actuator type :

Electric actuator:Electric actuator:381L electric actuator,PSL electric actuator,or other specified actuator

Function:cut-off  type or regulating type

Control signal:4-20mA,1~5V DC

Power AC220V ,50HZ

Electric angle type is a control valve with top guide structure. The valve body has a compact structure, smooth flow path, small pressure drop loss and large flow rate. Valve spool has a large guide area, good shock resistance,The globe control valve is equipped with a multi-spring diaphragm actuator, which has a compact structure and a large output force. The valve is widely used in a small allowable leakage. When the pressure difference between the front and rear of the valve is not large, it can control high-viscosity medium, fluid and mud containing particles, flash fluid, etc., to avoid coking and blockage, and to facilitate self-cleaning and cleaning.