Pneumatic Angle Type Control Valve Features & Specifications

Size:DN20~DN600 1/2”-24”

Pressure:PN1.6MPa~ PN42 MPa 150LB-2500LB JIS 10K ~JIS 40K End connection:RF RJ ,BW

Material:WCB，WC6，LCB ,CF8，CF8M，CF3M, 904L, 316Ti , A105 ,F304,F316, Duplex stainless steel, Monel, Hastelloy, (Special Materials on Request)

Bonnet type: Normal type（P）：－45～＋250℃

Extend type with I type-High temperature type（EI）：＋250～＋566℃

Extend type with EII type--cryogenic type（EII）：－45～－196℃

Pneumatic angle Type Control Valve Trim type:

Pressure-balanced spool with balance seal ring

Flow characteristics: Equal Percentage ,Linear type

Leakage class:class IV(stand type ) class V, class VI

Adjustable ratio:50:1

Actuator type :

Pneumatic actuator:Pneumatic diaphragm actuator or pneumatic piston actuator

Air supply: 3-7bar

Failure position :Normally closed (NC),Normally open(NO)

ZMAS pneumatic diaphragm angle type is a control valve with top guide structure. The valve body has a compact structure, smooth flow path, small pressure drop loss and large flow rate. The valve spool has a large guide area, good shock resistance, and the valve seat closing performance conforms to the GB/T4213-2008 standard. The regulating valve is equipped with a multi-spring diaphragm actuator, which has a compact structure and a large output force. The valve is widely used in a small allowable leakage. When the pressure difference between the front and rear of the valve is not large, it can control high-viscosity medium, fluid and mud containing particles, flash fluid, etc., to avoid coking and blockage, and to facilitate self-cleaning and cleaning. PN220 PN320 Nominal pressure angle high pressure regulating valve is a special valve specially designed for high pressure system which is easy to produce cavitation.