Type:ZJHM Pneumatic high pressure Control Valve 

Size:DN20~DN600 1/2”-24”

Pressure:PN1.6MPa~ PN42 MPa 150LB-2500LB JIS 10K ~JIS 40K

End connection:RF RJ ,BW

Material:WCB，WC6，LCB ,CF8，CF8M，CF3M, 904L, 316Ti , A105 ,F304,F316, Duplex stainless steel, Monel, Hastelloy, (Special Materials on Request)

Bonnet type: Normal type（P）：－45～＋250℃

Extend type with I type-High temperature type（EI）：＋250～＋566℃

Extend type with EII type--cryogenic type（EII）：－45～－196℃

ZJHM Pneumatic high pressure Control Valve Trim type:

Pressure-balanced spool

Flow characteristics: Equal Percentage ,Linear type

Leakage class:class IV(stand type ) class V, class VI

Adjustable ratio:50:1

Actuator type :

Pneumatic actuator:Pneumatic diaphragm actuator or pneumatic piston actuator

Air supply: 3-7bar

Failure position :Normally closed (NC),Normally open(NO)

Pneumatic cage guide high pressure control valve is mainly composed of valve body, spool, seat and an actuator. Its working principle is to use a pneumatic actuator to drive the valve spool to reciprocate in the valve seat, changing the cross-sectional area of the fluid channel, thereby achieving fluid flow and pressure regulation.